9
Installer Code
Lets you program a code that is used for all programming
and maintenance functions. The installer code cannot
arm/disarm the system.
Note: An installer code must be programmed in order
to program user access codes.
1. With the display showing INSTALLER CODE: enter
the desired code, then press
YES. The display shows
CONFIRM CODE.
2. Re-enter the code and press YES. The display shows
CODE NAME.
3. Enter a name for the installer code using the
alphanumeric buttons (up to 16 characters), then
press
YES. The display shows “Install Entry Complete”.
Adjusting Time and Date
Initial Configuration/Programming
Installation Sequence
Data and Time
1. With the display showing DATE (Year):, press the left
or right arrow button repeatedly until the correct year
number is displayed, then press
YES.
2. With the display showing DATE (Month):, press the
left or right arrow button repeatedly until the correct
month number is displayed, then press
YES.
3. With the display showing DATE (Day):, press the left
or right arrow button repeatedly until the correct day
number is displayed, then press
YES.
4. With the display showing DATE (Hour):, press the left
or right arrow button repeatedly until the correct hour
number is displayed, then press
YES.
5. With the display showing DATE (Minutes):, press the
left or right arrow button repeatedly until the correct
minutes number is displayed, then press
YES. The
display shows the programmed time and date
RECORDED. Then display shows “Entry Complete”.
Format
Lets you set up the system for reporting to a central moni-
toring station. The format selection determines how much
information must be programmed.
For Surtec and Contact ID formats:
1. With the display showing FORMAT: press either arrow
button until SURTEC or CONTACT ID is displayed, then
press
YES.
2. With the display showing PHONE PREFIX: enter the
required prex (such as a 9 with a pause for outside
line access) +
YES
or press
ESC/NO
if no prex
is required.
Note: To program a pause, press the @ button six times
for the # sign. Each # entry adds a 2-second pause.
3. With the display showing Account Number: enter
the subscriber (account) number (8 digits for Surtec,
4 digits for Contact ID), then press
YES.
4. With the display showing PHONE NBR 1: enter the
primary central station phone number the control
panel will dial rst to send reports, then press
YES.
5. With the display showing PHONE NBR 2: press
ESC/NO
to skip to the next step, or enter the secondary
phone number the control panel will dial to send
reports if attempts using the primary number are
unsuccessful, then press
YES.
6. With the display showing PERIODIC TEST:
24 HOURS, press either arrow button to select
the desired interval (1 hour, 12 hours, 24 hours,
48 hours, 7 days, or No Test) the control panel reports
a phone communication test to the central monitoring
station, then press
YES.
Note: If you select No Test and press YES, the next
menu prompt (CODE/STATE MODIFICATION?) appears.
7. With the display showing TEST HOUR: press
YES
to accept the default hour displayed, or press either
arrow button until the desired hour is displayed,
then press
YES.
8. With the display showing TEST (MINUTES): press
YES
to accept the default minutes displayed, or press either
arrow button until the desired minute is displayed, then
press
YES.
Vid eofied Security System I nstallatio n Manual
Connected To Monitor Station?
[
YES = continue, ESC/NO = skip]
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais